Failure analysis of metal materials
Failure analysis of metal materials
WSCT building materials laboratory has rich service experience in international and local enterprises. It always takes ensuring product quality and safety as its own responsibility and actively practices social responsibility. With advanced instruments and equipment and an experienced testing expert team, WSCT's building materials laboratory can provide quality assurance solutions such as testing, auditing, certification and training for the building materials industry and products to help customers effectively control risks and optimize product performance.
Service content:
With the vigorous development of the construction industry, the quality requirements of construction projects are becoming more and more strict. There are many reasons for engineering quality problems, and the quality of building materials is the most important reason. Therefore, we must do a good job in the quality inspection and control of building materials, and strictly control the quality of incoming raw materials. In order to ensure the quality of raw materials, we must carry out scientific tests and tests on the technical indicators of building materials according to the relevant national and industrial standards and specifications. Through scientific tests and inspections, we can accurately judge whether the building materials are qualified or not, whether they are suitable for construction projects, and ensure the quality of construction projects.
influence factor
1. The ability, experience and working attitude of the materialman will also affect the material monitoring work and the project quality.
2. The supply of building materials is unplanned, the stacking is irregular, the stacking is mixed, and there is no sign board. The management personnel did not take corresponding measures for the materials prone to problems due to improper management, which made some materials lose their original performance due to improper protection in the sun and rain.
3. Due to the untimely inspection of building materials, wrong inspection and missing inspection (such as cement stored for more than three months), unqualified materials are used as qualified materials, resulting in certain quality and safety hazards.
4. The low level of operators during construction makes the welded (LAP) joints of reinforcement not meet the requirements, and they are directly used without timely detection after welding, which affects the mechanical property requirements of raw materials of design reinforcement and affects the project quality.
5. The direct use of products that have not reached the age limit will cause unnecessary quality accidents.
6. Different testing standards and procedures in different regions, as well as different testing management systems and testing instruments in different regions, also affect the testing management of engineering material quality to a certain extent.
1、 The main testing capabilities cover the following aspects of building materials and products:
1. Mechanical performance and stability
2. Fire safety
3. Health, health and environment
4. Safe and convenient use
5. Noise protection
6. Energy saving and thermal insulation
7. Sustainability of natural resources;
With the rapid development of the construction industry, the quality requirements of construction projects are becoming more and more strict, and people pay more and more attention to the quality of projects. The quality of building materials is the premise and guarantee of the quality of construction projects, and test and detection is the most effective means to ensure the quality of inspection materials, so we must carry out scientific test and detection of various technical indicators of building materials according to the relevant national and industrial standards and specifications. Establish and improve the quality assurance system, clarify the material testing procedures, adhere to the three inspection system, and ensure the quality of building materials and project quality.
Service process
Consult customer service → confirm the test plan → fill in the application form → send samples → pay the test fee → test → send reports and invoices
